3D Ceramic Coating + Graphene Infused Kit

3D Graphene Infused Ceramic Coating is 3Ds most durable and resistant coating yet!

Designed to add a deep layer of protection, to the surface of the car, boat, motorbike or RV.

3D Graphene Infused Ceramic Coating Kit protects your car from the sun’s damaging rays and the resulting oxidization, is highly hydrophobic and keeps your car looking glossy, without the need for constant application.

This coating is not only Hydrophobic, but also Oleophobic, meaning it doesn’t like oils or rejects oils, making it the perfect protection against a wider spectrum of contaminants

3D Graphene Infused Ceramic Coating Kit is safe to use on clear coats and single stage paint coats.

Also works on Matte Paint and Vinyl Wraps.

Designed to last for up to 3 years on the paints surface, if maintained correctly

Kit Includes:
3D Graphene Infused Ceramic Coating 30mL
Applicator Block
(2) Microsuede Towels

Directions for Use:

– Pro-tip: Make sure the surface is completely clean, detailed and decontaminated.

– Wrap the 3D Suede Applicator around the 3D foam block and apply enough coating to cover the flat surface of the suede.

– Using a cross hatch pattern (side-to-side and then up-and-down strokes), spreading the coat evenly. Work in sections (panel by panel)

– Weather will determine the size of the section you want to work with.

– Temperature and humidity can affect how quickly the product dries.

– Apply more product as the suede dries up. Looks like a very thin oily film

– Wait 30 seconds and buff the product off with a clean soft microfiber towel then move onto the next section.

– If the surface feels oily after buffing, wait a few more seconds and wipe off again.

– After 30min it’s safe reapply a 2nd layer

– It needs to ideally sit overnight before driving or getting wet, however for optimum results, leave it to cure for 72hrs.