Labocosmetica AUDACE Supreme Cut Compound 250ml/1L

• Deep, accurate & reliable cut
• Reduces working time by up to 50%
• Ideal for extra-hard or ceramic paintwork
• No residue or dirt on trims
• Highly versatile product suitable for different surfaces depending on the type of pad used
• Made in Italy

Heavy Cut Compound

Labocosmetica AUDACE consists of a water-based mixture with high cutting performance at low speed. This is achievable thanks to a selection of state-of-the-art abrasives, as they allow an orbital polisher to work in a similar way to a rotary polisher, reducing the time required by up to 50%.

AUDACE is a top choice among detailers who love the versatile blend because it solves the most difficult situations while saving time and money.

The "Cold Cut Technology" makes it possible to eliminate larger defects and defects at low speeds (1200 rpm with rotary polisher or speed 4.5 with an random orbital polisher) and to reduce the formation of holograms. It also ensures greater working comfort, shortened working times and lower product consumption.

Labocosmetica AUDACE is particularly effective on hard or ceramic surfaces, but with the right pad it proves to be a very versatile product suitable for any surface. AUDACE is designed to eliminate deep scratches even when sanding with 1000 grit and to give the paint a medium polished finish despite its high cutting ability. The polish is easy to use, odorless, free of paraffins or fillers and does not leave dirty seals.

The whole Labocosmetica polish line is odour-free and ‘VOC FREE’.

How to use Labocosmetica AUDACE

Recommended Pads

• Labocosmetica Hybrid microfibre pad
• Labocosmetica Blue Pad medium cut pad

Random Orbital Polishers

• Apply 3 small drops to your polishing pad per working section
• Spread the product around your working area on speed 1
• With medium / medium-light pressure, work the product up to speed 5 over an area of 40x40cm

Rotary Polishers

Thanks to its "Cold Cut Technology" it will be It is possible to starting from 400-600 rpm up to 1000-1200 rpm and finish by making a last pass at 400-600 rpm. The latter will be the speed ideal for having an excellent compromise between cut and finish even with the use of wool pads which, as is well known, leave no way out for the creation of holograms.